RA900
2-Laser Tire Mold Production
UnionTech RA900 is a dedicated SLA system for series production of tire mold segments, combining 2 lasers, a 950 × 550 × 400 mm build volume, and ±0.01 mm liquid level control. Fully automatic calibration and Xtyre resins deliver production up to 40 times faster than CNC.
Browse UnionTech 3D printers.
The products below are optional but included in the quote for successful operation.
Equipment: PCU-80 Curing Unit, RRT-80 Resin Tank
Technical Specifications
SLA (Stereolithography)
950 × 550 × 400 mm
0.05–0.07 mm
2 Lasers, Solid-State Frequency-Tripled Nd:YVO4
355 nm
6–18 m/s
±0.01 mm
RSCON
Polydevs Pro, BPC
Windows 10
371 kg
997 × 787 × 457 mm
200–240 VAC, 3.0 kVA
22–26 °C
< 40%
2,152 × 1,445 × 1,836 mm
1,100 kg
CE
Xtyre 005, Xtyre 009
The system is an open platform; besides the listed materials, it is also compatible with third-party materials that the machine specifications support. Parameters must be developed separately.
2-Laser Serial Production of Tire Molds
With 2 lasers and a 950 × 550 × 400 mm build volume, the RA900 is a dedicated SLA system for serial production of large tire mold segments at high speed with 0.05 mm layer precision.
Large Build Volume
The 950 × 550 × 400 mm volume builds large-diameter tire mold segments in one go.
Dual Nd:YVO4 Laser
2 lasers share the build area, shortening the mold cycle time.
Fine Layer Thickness
Thin layers of 0.05–0.07 mm deliver high resolution in sipe and pattern details.
High Scanning Speed
A scanning speed of 6–18 m/s increases serial production efficiency.
Xtyre Resin Compatibility
Optimized for Xtyre 005 and Xtyre 009, developed for tire molds.
Polydevs Pro / BPC Data Preparation
Automatic nesting and support generation for mold segments.
3D printed with RA900.
Tread Pattern with Sipe Details
Fine Sipe Blade Array
Mold Segment Serial Production
System Workflow
-
Data Preparation
Supports and slicing are prepared in Polydevs Pro.
-
Resin Preparation
The resin tank is filled and heated.
-
3D Printing
The laser cures the resin layer by layer.
-
Part Removal
The platform is raised and the part is removed.
-
Washing
Residual resin is cleaned off with solvent.
-
UV Curing
The part is UV-cured in the PCU unit.
